I finished building the V3 board and surpisingly enough I put it in and it worked with no problems. I still got the misfire when I first put it in but I played with some things and upped the dwell and now it runs perfect. So now I can crank the boost back up and have fun
Launch control works good too. I was playing with it while i was driving and i floored it with the clutch in then let off on the clutch not realizing that i was still in second gear and spun all 4 wheels
Ok so I posted this before I talked to you when it was running fine. Since then it started misfiring again. WHY!???
Oh and I cleaned the car up some already. cleaned under the hood a couple weeks ago (needs cleaned again now), vacummed it, and I'll wax it sometime. I also got the window sliders coming so I can fix that window. I might also look into getting new door cards too since mine are pretty worn out.
I've got it boosting good now. It misfired slightly on 2 runs at the auto X but i adjusted the pots some and it fixed that. It seems to misfire at either high load and not at normal load or misfire with normal driving load and not misfire with high load. I chose the non-high load misfire cause I's rather have boost and it still drives fine just not as smooth. I might actually go back to the ford trigger wheel if I cant get it perfect but I'm gonna try and its almost there now.
I ordered a t3/t4 center section 40 trim with stage 3 exhaust wheel and it should be here next week
Ps: Jamin I took the turbo with me when I left last time
EMO4life
